All
test results shown below were obtained by running a modified continuous
load test. The resistive load (see Ohms value) was applied to
the battery until the cutoff voltage was reached (e.g. 0.75 volts).
The battery was then allowed to rest for 15 minutes before the
load was reapplied. This process was repeated until the battery
fell below the cutoff voltage within 5 minutes of reapplying the
load, at which time the test was terminated.
Ohms
= the resistive load used for the test.
Vcutoff
= the cut-off voltage in volts.
AvgWH
= the average Watt-Hours for this battery (your electric bill is
based on this).
