• This Universal Fast & Smart Charger is designed for charging NiMH / NiCad battery packs from 9.6V - 18V (9 to 15 cell packs)

• Excellent for 12V , 13.2V and 14.4V bikelight NiMH batteries pack.

• Just plug in and wait for the battery to charge. Red LED indicates charging, and Green LED means fully charged

• 120-240V AC input for worldwide use.

• Detects battery pack voltage and sets proper charging voltage automatically

• Cuts off power automatically using negative delta V IC when battery pack is fully charged.

• Built in IC protects battery from high-current, short circuit & reverse polarity.

• One temperature sensor outlet (Female BEC connector) is installed with the charger double protect the battery from overcharge conditions.

• Two charging levels, 0.9A and 1.8A, are selectable by a switch for both high capacity ( >1800mAh) and low capacity battery pack ( <1800mAh)

• For battery packs between 1800mah and 900 mah, use the low level switch - charging rate: 0.9A

• For battery packs over 1800mAh, use the high level switch - charging rate: 1.8A

This charger includes:

1. One standard 2 pin male universal connector with 12" length cable installed with the charger

2. One 5' cable with female connector and two alligator clips which allow you to connect a battery pack to the smart charger.

3. One temperature sensor ( 70 deg C thermister ) is included. It must be plugged to battery charger and be attached to battery pack before charging to protect battery overheating. It will cut-off power if battery temperature is over 70 deg C.